Smart Battery for cable telecommunications services –
Fiber to the Node (FTTN) and backhaul network
Water protection. AutoNod is a rugged battery, designed for outdoor conditions. Its electronic components are covered with a conformal coating that protects them from damaging elements such as bugs, dust and especially water.
Thanks to this coating, our electronic circuits are completely waterproof. Photo credits: Nanoslic
Convection movements of the air passing through the battery’s vents help to cool the device.
Battery selection. We constantly test various cells in Autonom’s R&D center to ensure that our products will provide long-lasting performance.
Battery management. By carefully controlling the batteries’ charge and the discharge, Autonom’s battery management algorithms minimize the cells’ degradation, while maximizing safety.
Circuit protection. AutoNod is protected from input power spikes, lightning, under-voltage, short-circuit & overcurrent and excessive heat. Also, redundant checks prevent the battery to enter overvoltage and over-discharge states, which would cause accelerated degradation.
Smart remote monitoring. AutoNod is equipped with a data transmission system connected to a cloud which in turn processes the battery’s data into valuable insights for the operator.
AutoNod technical specifications
|Intelligent features||Access to the Autonom cloud which
ease network design, procurement,
storage, maintenance and improves
- Location tracking of AutoNod-2
- Power outage analysis
- Battery health analysis
- Real time information
- Next month’s order prediction
- Predictive maintenance
- Automatic warranty claims
|Mechanical dimensions||180 x 60 x 36 mm|
|IP Rating||IP32 (finger proof and rainproof)|
|AC input||100VAC-300VAC, on a screwless terminal block|
|AC input protections||Overvoltage (such as thunder), overcurrent, overtemperature, EMI filter|
|DC output||12VDC, on a female right angle 5.5 x 2.1 mm barrel jack|
|DC output protections||Overcurrent, over temperature|
|Maximum output current / power||r 0.6A / 7W|
|Nominal output current / power||0.4A / 5W|
|Runtime||3 h 35 minutes of runtime initially and warrantied 2 h of runtime after 3 years|
|Warranty||3 years. Replacement device is sent
automatically if used under normal conditions
|Charge time||Less than 4 hours|
|Battery technology||Long life 18650 lithium-ion|
|Battery protections||Overcharge, over discharge, overcurrent and over temperature protections|
|Additional safety features||Boards are conformal coated for exterior usage. Enclosure is made of ABS
|Maximum ambient temperature||50°C|
|Nominal ambient temperature||35°C|
|Replacement at end of life||Refurbished by Autonom Inc.|